BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If nonetheless the mains plug is cut off be sure to remove the fuse and dispose of the plug immediately, to avoid possible shock hazard by inadvertent connection to the mains supply. The wires in the mains lead are coloured in accordance with the following code: Blue to N Neutral or Black Brown to L Live or Red If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N Neutral or coloured black.
Brown wire to terminal coded L Live or coloured Red. If in doubt -- consult a competent electrician. EN 3 Do not point the lens or the viewfinder directly into the sun.
This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder. This camcorder is designed exclusively for the digital video cassette and MultiMediaCard.
Only cassettes marked " " and memory cards marked " " can be used with this unit. Before recording an important scene. Any commercial use without proper permission is prohibited.
Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand. DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections including the mains plug, extension leads and interconnections between pieces of equipment are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug when making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way -- switch off, withdraw the mains plug and consult your dealer. DON'T remove any fixed cover as this may expose dangerous voltages. DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people. DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving. DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fit the manufacturer's approved stand or legs with the fixings provided according to the instructions. DON'T allow electrical equipment to be exposed to rain or moisture.
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
This takes you directly to the demo mode's Setting Menu so you will not have to go through the Menu Screen. The normal screen appears. Core Filters reduce interference. Release the stoppers on both ends of the Core Filter. Run the cable through the Core Filter, leaving approx. Wind the cable around the outside of the Core Filter as shown in the illustration. NOTE: Take care not to damage the cable.
Close the Core Filter until it clicks shut. Lithium-ion is vulnerable in colder temperatures. To Detach The Battery Pack. BN-VU 1 hr. Refasten the Velcro strip. Grip Adjustment 1 Separate the Velcro strip. Rotate the MENU wheel to input the day. Press it. Repeat to input the month, year, hour and minute. OFF: Allows you to switch off the camcorder. Full Auto : Allows you to record using NO special effects or manual adjustments.
The still images can also be processed on a PC or printed out. To Stop Recording. Snapshot This feature lets you record still images that look like photographs onto a tape. If you press during Record-Standby. If you press during Recording. The further you slide the Power Zoom Lever, the quicker the zoom action.
In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus pg. Display Frames are not displayed during recording. When a blank portion is recorded on a tape Time code Time code Time code Tape Already recorded scene Blank Newly recorded scene Shooting start point Shooting stop point Shooting start point Proper recording Time code Time code Time code Tape Already recorded scene New scene Latest scene.
Shooting start point Shooting start point Shooting start point. If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject.
To End Progressive Mode Recording. Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings pg. Function menu setting depends on the function. Equivalent to the 32 kHz mode of previous models 16 BIT Enables recording of stereo sound on two separate channels.
By digitally processing and magnifying images, zooming is possible from 10X the optical zoom limit , to a maximum of 40X digital magnification. By digitally processing and magnifying images, zooming is possible from 10X the optical zoom limit , to a maximum MENU of X digital magnification. AGC The overall appearance may be grainy, but the image is bright. The overall appearance may be grainy. The tally lamp comes on to signal the start of recording. It also activates the shutter sound effect pg.
The beep sounds when the power is turned on or off, and at the beginning and end of recording. Also to activate the shutter sound effect pg. OFF The tally lamp remains off at all times. Even though not heard while shooting, shutter sound is recorded on the tape. The numbers range from 01 to Factory setting is Menu Screen Explanations cont. OFF Automatic demonstration will not take place. Allows you to record a few frames only. By using an inanimate object and changing its position between shots, you can record the subject as though it is moving pg.
Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting. During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes Naturally expands the image to fit the screen without distortion. The zoom range is extended beyond the maximum optical zoom wide angle range. Zooming is possible from 0. This mode is suitable for shooting in a small room. You can only view or download manuals with.
Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual. Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual. Buy as much as you need.
Basic Recording Advanced Features Basic Playback Basic Connections Advanced Connections Playback and Playback Zoom Playback Special Effects Random Assemble Editing For More Accurate Editing Audio Dubbing Docking Station Controls, Connectors And Indicators Records 25 odd and 25 even image Fields, for a total of Since there is a time lag between an odd and.
Allows you to set the recording mode SP or LP depending on your. Enables recording of stereo sound on four separate channels, and is. Equivalent to the. Enables recording of stereo sound on two separate channels. Allows you to use the Digital Zoom. By digitally processing and magnifying. Before mounting the camcorder inside the marine case, dive with only the empty marine case and test for water leaks.
Be sure to perform this test to ensure the safety of your camcorder. The following are some common causes of water leaks: A. The marine case is used without attaching the O-ring. The O-ring is not mounted in the correct position. There is sand, dirt, hair or other foreign matter on the O-ring. There is sand, dirt, hair or other foreign matter on the contact surface of the O-ring or on the inside of the lid.
The provided strap or silica gel bag is pinched inside the marine case when the lid is closed. To protect your camcorder and ensure optimum use, keep the examples listed above in mind when using the marine case.
JVC accepts no responsibility for water leakage or damage to anything inside the marine case camcorder, cassette, etc. Be sure to follow correct procedures when using the marine case. Remove the four buckles on the marine case and open the. Fit the Zoom Lever projection on the marine case over the outer groove of the Power Zoom Lever on the camcorder, making sure that.
Before sealing the marine case, check that there is no sand, dirt, or other foreign matter on the O-ring mounted on the front lid or on the O-ring contact surface on the main unit. Also make sure that the inserted silica gel bag is not pinched. If you dive with foreign matter trapped. Check that the O-ring on the front lid is correctly mounted in the groove, then press in the front lid. Flip down the four buckles in the directions. If the flash is used, its brightness will be darker than usual due to the marine case.
This is normal and is not a malfunction.
0コメント